HP Server RAID Configuration

http://bit.do/dkuP5 UfsExplorer secret discount page.
1.Power on the Server and wait for the Array Controller ROM utility to prompt you to press F8 to run Option ROM configurations for Arrays. 2.Press F8 to enter the utility then you will get the Array controller utility to create logical drives. Select Create logical drive and press Enter. 3.Here we can see the Available Physical Drives. Choose the drives you want to add to RAID 0 logical drive. Remember RAID-0 required minimum two disks. so select at least two drives. Once you selected drives use tab button to navigate to the next option RAID Configuration and choose RAID 0 4.Press Enter to create the logical drive 5.Press F8 to Save the configuration. This will create the RAID 0 Logical Drive. 6.Press Enter to continue. That will take you to the main menu again. It is good to verify the Logical drive we created. For that select View Logical Drive and press Enter 7.That will show you the logical drive you have just created. Since I have selected all eight Physical disks (146GB each disk) available, for this logical drive we have got 1 TB capacity. 8.You can Select the Logical Drive and press Enter to see the physical disk array(total number of disk used in this RAID-0 local drive. 9.You need to press ESC to return to main menu. when you done press ESC again to quit from the utility and server will continue the boot process.